NAME: FINISH V16.
GROUP: transpiring acrylic protective
UTILISATION: it acts as a primer as applied before Magic Light Finitura K100 application.
TECHNICAL DATA:
Specific weight: 1.000 + 30 gr/LT. at 25°C (ISO 2811-1)
Viscosity: 250 cps (EN ISO 2555)
Yield: 0.25LT per 4- 5 sqm for Magic Light Finitura K 100(it may vary according to the roughness, porosity and surface absorption and to the method of application )
Aesthetic effect: mat
Colours: transparent
DRYING TIME:
On the surface: 30 minutes at 20°C
2nd coat: 2 hours at 20°C
On depth: 24 hours at 20°C
CARACTERISTICS AND RESISTANCE: it is to be applied over the top of new and old paint on smooth or rough supports, as long as they are properly fixed and not dusty before Magic Light Finitura K 100.
PREPARATION OF THE PRODUCT:
Dilution: ready to use for Magic Light Finitura K100.
APPLICATION:System: by brush, by roller, by spray
Coats: 1 - 2 (with 2 coatings it verges on becoming glossy)
APPLICATION CYCLE: apply one coat of undiluted Finish V 16 using a brush or roller. After approximately 12 hours at 20°C, apply Magic Light Finish K100.
Application temperature: between +5°C and +30°C.
Storage: make sure the tin is tightly closed, even after use, and stored at a temperature no lower than +10°C and no higher than +30°C.
Stability: approximately 1 year, if well sealed and never opened
NOTES: Mix carefully before use. Wash the tools soon after use with water and soap.